Double Drilled Rotors

Inferior rotors drill holes randomly, creating stress concentrations that lead to cracking under thermal cycling. Ghost Brakes drills are positioned between slot paths at engineered intervals, avoiding the spoke and vane structure that carries mechanical load. Every hole is chamfered to prevent stress risers at the drill edge.

• Repeated hard stops — highway off-ramps, canyon runs, light track use
• Combined with diamond slotting — degassing plus active cooling
• GEOMET-coated rotors — drill edges protected from corrosion
• Truck and tow applications — supplemental cooling on loaded downhill grades

Double drilling on Ghost Brakes rotors is engineered for performance and longevity — not appearance alone. Pair with the pad tier matched to your platform for optimal results.

Technology pages explain why Ghost Brakes hardware is built the way it is; Slyde Over handles cart checkout, shipping tracking, and warranty registration. Click Where to Buy from any vehicle or technology page to open the retailer with UTM attribution — same rotors, same pads, same warranty.

When you have chosen a tier, confirm rotor diameter and pad shape against your factory caliper spec. American split kits (2-piece front, G11H18 rear) balance cost and capability on Hellcat, Camaro, and Charger platforms; full 2-piece Euro kits maximize thermal headroom on track-focused builds.

Still researching? Read vehicle-specific blog guides, then use the year/make/model finder to narrow SKUs before you add a kit to cart.

Document your rotor diameters and pad shapes when comparing tiers so support can confirm compatibility in one email.

Deep dives on 2-piece rotor technology, carbon ceramic pads, and GEOMET coating explain metallurgy and coating choices. Link to those pages when you want engineering context; return to vehicle hubs or Slyde Over when you need live SKU, price, and checkout.

Compare floating rotors vs one-piece G11H18 kits in our blog, then filter the Slyde Over catalog by make and model. Free continental US shipping applies to qualifying complete kits through our authorized retailer.

Winter storage, salted roads, and repeated short trips are hard on untreated iron rotors — GEOMET and proper pad selection address corrosion and dust without sacrificing bite for street and light track use.

If you are comparing against OEM or big-box brands, read our competitor comparison posts on Slyde Over, then return here for metallurgy context before you choose a tier.

Use the vehicle search to open your year/make/model hub, compare 555 and 777 tiers, and follow Where to Buy when you are ready to checkout on Slyde Over. Spec sheets list rotor diameter, pad compound family, and whether the kit uses 2-piece fronts, full floating corners, or GEOMET-coated one-piece rotors.

Off-road, tow, and track builds should confirm caliper clearance with your wheel spec — especially on TRX, Raptor, and HD trucks where optional wheel packages change clearance. When in doubt, contact us before you order.

After your kit arrives, inspect rotors for shipping damage and verify part numbers against your order confirmation before you remove old hardware. Clean hub faces, guide pins, and caliper bridges — contaminated hubs are a common source of runout that feels like a “bad rotor” when the disc is actually true.

Bed pads in a controlled cycle: repeated moderate stops from street speed, then cool-down, without coming to a complete stop while pads are hot. Track drivers should bed on the street before the first session so transfer layers form before you rely on the brakes at entry speeds.

Warranty coverage applies to manufacturing defects when Ghost Brakes rotors and pads are used together as shipped. Contact support with photos if you see cracking, delamination, or coating failure under normal use — we will walk through install history before approving replacements.

When you are ready to purchase, use Where to Buy to open Slyde Over with the correct UTM tags so fitment support can reference the same SKU you see in cart.